Sega Daytona Championship USA Owner's Manual page 64

Network Test
This test is used to test the network link between cabinets (if connected). Select 'NETWORK' from the Test menu to
display the Network Test Menu.
IMPORTANT NOTES:
In any cabinet configuration one cabinet must be set to ID=1, this is the Server that will control the network
operation.
When making changes to "Cabinet ID" the cabinet should not be networked to any other cabinets.
9
Once Changes are made "CONFIRM CHANGES" must be selected to commit the change and restart the cabinet.
Use the SERVICE button to move the cursor to the desired test item.
Press the TEST button to enter the selected item.
NETWORK STATUS:
ACTIVE CABINETS
(INC THIS ONE):
TOTAL LINKED CABINETS:
CABINET ID:
CONFIRM CHANGES:
BACK
Move the cursor to BACK and press the TEST button to return to the Test Menu screen.
56
OK SERVER = Connected as server. OK CLIENT = Connected as client
The total number of cabinets connected or UNKNOWN
The total number of cabinets networked together. Must be set identically
on all connected cabinets. If this value is changed, the user must use
CONFIRM CHANGES and the cabinet will restart.
ID of cabinet from 1 to 8. If this value is changed, the user must use
CONFIRM CHANGES and the cabinet will restart.
The user will be prompted to press TEST again to confirm. If the user
presses TEST again, the action is confirmed and the Cab will reset. If the
user presses SERVICE the action is aborted and settings discarded.
Exit this test and return to Test & Service Menu
9-2 fig . 12