10-3 ADJUSTMENT METHOD
All adjustment values are set accurately at the time of shipping from the
factory. Do not adjust these values needlessly or apply adjustments not
specified in this manual. The display may not appear properly if the values
are incorrect.
CONTROL - ADJUSTMENT PROCEDURE
This sections explains basic control procedures for making adjustments using the buttons on the 'Monitor Adjustment
Board'
LOCATION
The DISPLAY CONTROL BD is located on the rear of the Display Panel. Remove the Back Door to gain access.
Back Door
10-3 fig. 01
Display Panel
10-3 fig. 02
Video Cont. Bd
10-3 fig. 03
10
71