Sega Daytona Championship USA Owner's Manual page 91

11-7 SHIFT SWITCH REPLACEMENT
Follow the instructions below to change the microswitch.
1
Unscrew and remove the M3x16 Self Tapping Screws which secure the microswitch to the Gear Shift base.
2
Remove the microswitch
3
Remove the wiring harness from the old microswitch and re-attach it to the replacement switch in the same
manner
11-7 fig. 01
4
Using the M3x16 Self Tapping Screws, refit the replacement microswitch to the Gear Shift base.
5
The unit is now ready to be refitted into the Control Panel. To do this, follow the instructions in reverse
order
11
83