Greasing - Sega Daytona Championship USA Owner's Manual

14-1 GREASING

GREASING SEAT RAIL
Move the seat to the rear most position and apply grease to the portion shown in the figure once every 3 months by
using a good quality white lithium grease. After greasing, move the seat a few times forward and backward so as
to allow the grease to be applied all over uniformly. Remove any residue from the protect rubbers and surrounding
area..
GREASING BRAKE&ACCEL
Remove the (4) fixings which secure the front and rear covers. Apply the lubricant to the areas shown. Be sure to
apply a good quality synthetic lubricant. Using a mineral based lubricant may cause damage to plastic parts. Do not
apply lubricant to parts other than those mentioned. Doing so may cause premature deterioration.
Security fixings
Seat Rails
Apply Grease
Security fixings
15-1 fig. 02
Apply Grease
15-1 fig. 01
15-1 fig. 03
14
103