Adjusting/Replacing The Volume Pot - Sega Daytona Championship USA Owner's Manual

11-3 ADJUSTING/REPLACING THE VOLUME POT

Replacing the Volume
1
Remove power from the cabinet.
11
2
Remove the two screws and lift off the potentio cover.
3
Detach the connector from the volume to be replaced.
4
Remove the single screw that secures the potentiobase. (see 11-3 FIG. 01).
5
Without detaching the volume, remove the potentiobase. (see 11-3 FIG 02).
6
The wire connected to the volume pot will be reused. Use a tool such as a pair of snips or cutters to remove
the old heatshrink tubes which cover the contacts.
80
POTENTIO COVER
11-3 fig. 01
TRUSS SCREW (2), chrome
M4x8
POTENTIOBASE