Precautions When Moving - Sega Daytona Championship USA Owner's Manual

7

PRECAUTIONS WHEN MOVING

● As used in these instructions, the term "moving" refers to moving of the product
within the same building, store or facility. These instructions do not cover
moving between different buildings, areas, stores or facilities, since diverse
7
factors are involved, not only packaging but also loading onto transport
vehicles and securing the product in place during transport. To transport the
product to a different building or store, contact the vendor where the product
was purchased, the office indicated in these instructions, or request that the
moving be done for you. This product is made up of parts that are of large
size and heavy weight. Unless work is entrusted to someone with expertise in
packaging and transport of such parts, a serious accident might occur.
● Even when the product is to be moved within the same building, store or facility,
contact the point of purchase or the office indicated in these instructions if
there will be level differences and/or narrow or low level entrances while
moving. Alternatively, request that moving be done for you. Never disassemble
the product in any way not covered in these instructions as this could cause
fire, electric shock and/or short circuit.
● Always disconnect the power cable before moving the product. If it is moved
with the power cable connected, the cable could be damaged, causing fire or
electric shock.
● A qualified electrician is required for moving product parts within a store and
for changing indoor wiring. Do not have work performed by anyone who is not
qualified, otherwise there could be electric shock.
● Have work performed by site maintenance personnel or other qualified
individuals. Do not allow people without proper knowledge and technical
expertise to work on the product as this could cause electric shock or other
serious accident. Also, customers could be injured while operating the product.
● Proceed with checks and tasks as indicated in these instructions. If instructions
are not followed or if tasks and/or checks are neglected, an electric shock,
serious, or fatal accident can occur. Also, customers could be injured while
operating the product.
● Be careful not to damage wiring. Before separating parts that have wiring
connections, disconnect the wiring connections, unravel wire bundles and
undo fastenings. Only after that, remove fasteners (screws, nuts, etc.). If wiring
becomes damaged, there could be an electric shock, short circuit or fire.
32