Sega Daytona Championship USA Owner's Manual page 42

● If you need to move components through a narrow or low door and the only
way to get the separated components through is to turn them on their side (or
if a separation method other than those described in this manual is required),
either make a request to the office listed in this document or the place of pur-
7
chase to perform the operation or contact them regarding how to perform it.
Carelessly turning the components onto their side or separating them in ways
other than those depicted in this manual may lead to irreparable damage.
The machine can be moved over short distances within the same environment without the need to disassemble.
However, when transporting the machine to a different location it is advised that the machine be disassembled
into two individual components. These components are the (1) Display Cabinet Assembly and (2) Seat Cabinet
Assembly.
For a detailed instruction on how to disassembly the machine into these 2 parts, please refer to Chapter 6 in this
manual and follow the instructions of "Installation" in reverse order.
● When relocating the machine to a different area within the same environment,
be sure to raise all leg adjusters. Failing to fully raise all leg adjusters may cause
them to hit the ground and become damaged. If the leg adjusters become
damaged, replace them immediately. Do not locate the machine using
damaged leg adjusters. Locating the machine using damaged leg adjusters will
make the product unstable.
34
not to scale
7-1 fig. 02
7-1 fig. 01
Fully raise ALL leg adjusters when moving
the machine.