Sega Daytona Championship USA Owner's Manual page 26

● Handle molded parts with care. Excessive weight or pressure may cause them
to break and the broken pieces may cause injury.
● To perform the operation safely and accurately, use a safe, steady footstool or
stepladder. Working without this may lead to a fall and possible injury.
● Attempting to forcefully connect the incorrect connector or connecting a
6
connector at the wrong angle or facing may damage the connector and could
lead to overheating and burn related injuries.
● When attaching or removing doors or lids, be careful that your hand or finger
does not get caught in anything.
● Be very careful when handling LCD screen. The screen can be damaged easily
and cannot be repaired once damaged. Such damage can only be repaired
by completely replacing the screen.
● Be careful not to damage parts surfaces. In some cases, if such surfaces are
damaged, the part must be replaced; it cannot be reinforced or repaired.
The assembly of this product is performed in the following 6 steps:
6.1 UNPACKING THE CABINET
6.2 JOINING THE CABINETS
6.3 INSTALLING THE BILLBOARD
6.4 INSTALLING MULTIPLE CABINETS (COMMUNICATION)
6.5 LINKING THE CABINETS (COMMUNICATION)
6.6 APPLYING POWER
18