Unpacking The Cabinets - Sega Daytona Championship USA Owner's Manual

6-1 UNPACKING THE CABINETS

● Be very careful when removing the Monitor and Seat cabinets from the pallet.
6
Use only hydraulic lifting equipment such as a fork lift. Some parts weigh in
excess of 200Kgs. DO NOT attempt to remove the machine from the pallet by
hand. Doing so may result in serious personal injury and/or damage to the
cabinet and its components.
● There are 2 "LIFTING POINTS" highlighted on the lower front and rear parts of the
machine by a symbol. Always use these points when lifting.
Display Cabinet
This product is delivered as 3 individual components. 2 x Pallets for the two ASSY DISPLAY CABINETS and a single pallet
for both ASSY SEATS. Take care when removing the machine from it's pallet. Only use appropriate lifting equipment such as a
Fork Truck or similar lifting equipment. DO NOT attempt to remove by hand. Removing this product from its pallet by hand can
cause severe injury and/or damage to the product and surrounding area.
The plastic outer covering is specially designed to fix the cabinet to the pallet. Once the plastic covering is removed, the machine
will no longer be held securely to the pallet.
Remove the cabinet from it's pallet by approaching it from the rear. Using lifting equipment, carefully lift the machine up
enough so that the pallet can be dragged from beneath it.
FORK/LIFT HERE
6-1 fig. 03
20
6-1 fig. 01
6-1 fig. 02
6-1 fig. 04