Blackmagicdesign ATEM Live Installation And Operation Manual page 20

ATEM Constellation 8K has flexible multi view layout options for 4, 7, 10, 13 or 16 views.
These modes let you configure views from up to 16 sources per multi view, which is useful for
viewing a large number of sources such as cameras and Hyper Decks at the same time.
Because ATEM Constellation 8K has 4 multi views in HD and Ultra HD mode and each multi
view displays up to 16 views, you can show up to 64 views at the same time!
Customize the multi view for ATEM Constellation 8K.
Audio meters can be turned on or off within each source view, or all at once, by clicking on
the respective icons in each view or the 'all on' button, respectively.
You can also turn the safe area guides in the preview window on or off by clicking the
respective icon.
Connect a HyperDeck
If you are running ATEM 6.8 or newer, you can connect up to four HyperDeck disk recorders
to your ATEM switcher. This lets you use a HyperDeck as a high capacity media pool
or record your switcher's output. Refer to the 'HyperDeck Control' section in this manual for
more information.
Connect a HyperDeck
Getting Started 20