Blackmagicdesign ATEM Live Installation And Operation Manual page 10

ATEM 2 M/E Production Studio 4K supports SD, HD and Ultra HD video and is capable of
switching 20 external inputs from its SDI and HDMI connectors. Input 1 is selectable between
the HDMI Input 1 and SDI Input 1 connector. The front panel keypad allows on-the-fly selection
of the 6 auxiliary output sources and the large LCD gives instant confirmation of your aux
output content.
ATEM 2 M/E Production Studio 4K
ATEM 4 M/E Broadcast Studio 4K supports HD and Ultra HD video and is capable of switching
20 external SDI inputs. Features include 4 media players, advanced chroma keying, Ultra HD
multi views and 12G-SDI support for Ultra HD frame rates up to 2160p59.94 on a single BNC
connector. The front panel keypad lets you select between 6 auxiliary output sources and you
can monitor the outputs on the large built in LCD.
ATEM 4 M/E Broadcast Studio 4K
NOTE If you have an ATEM 2 M/E Broadcast Studio 4K, you can update your
switcher to ATEM 7.3 or later and enable all the same features that are available on
ATEM 4 M/E Broadcast Studio 4K. This means you can update your ATEM 2 M/E
Broadcast Studio 4K switcher to an ATEM 4 M/E Broadcast Studio 4K simply by
updating the internal software.
Plugging in Multi View Monitoring
The ATEM can be a little intimidating when first seen, especially since some models have no
controls to access, just lots of connectors! So the first step is to plug in power and a monitor and
see it working! ATEM switchers have a front control panel with a built in LCD so you only need
to connect power to see them working!
Getting Started 10