Blackmagicdesign ATEM Live Installation And Operation Manual page 112

Saving user profiles on ATEM Advanced Panel
ATEM Advanced Panels allow you to save up to ten profiles. This means you can save
all your preferred panel settings and macros and then reload them the next time you
are using the panel, perfect for when a panel will be used by more that one user.
To save a user profile:
1 Once you have set up the panel with all your preferred settings, press on the soft
'profiles' button above the LCD screen to open the user profiles settings.
2 Press the right arrow button in system control to navigate to the profile page.
3 Using the soft control knob, select an empty profile slot.
4 Press the soft 'save' button above the LCD to save the profile.
Now your profile is saved to the panel. The next time you want to use the panel, you simply
need to restore your profile.
To restore a user profile:
1 Press the soft 'profile' button above the LCD screen to open user profiles and press the
right arrow control panel button.
2 Using the soft control knob, navigate to the user profile you want to restore. If the text
above your profile slot is orange, that means that profile is currently in use.
3 Press the soft 'restore' button above the LCD to load the profile.
Performing Transitions using ATEM Hardware Panels 112