Using Embedded Sdi And Hdmi Audio Sources - Blackmagicdesign ATEM Live Installation And Operation Manual

Using Embedded SDI and HDMI Audio Sources

All ATEM switchers include a built-in audio mixer that lets you use the embedded HDMI and
SDI audio from your cameras, media servers and other inputs without the need for an external
audio mixer.
Once you've connected your SDI and HDMI cameras to the switcher for vision mixing, there are
no other connections to make as the audio mixer uses the embedded audio in the video signal.
This saves space and makes setup very fast and low cost as you don't need separate audio
connections for every video source. You don't need an external audio mixer unless you prefer
to use one.
The audio is mixed in the Audio tab of ATEM Software Control and output over the SDI and
HDMI program outputs as embedded digital audio.
All ATEM switchers feature XLR or 1/4 inch jacks that let you monitor mixed audio on the
monitor XLR or TRS output. The audio mixer contains independent controls for setting the
monitor audio level and also for selecting solo audio monitoring when working with these
ATEM switcher models.
For maximum flexibility, The ATEM 4 M/E Broadcast Studio 4K and 2 M/E Production Studio 4K
feature separate XLR monitor outputs that can be switched into an extra pair of program
audio outputs.
Using Audio 187