Blackmagicdesign ATEM Live Installation And Operation Manual page 158

JAdjusting Borders
Borders are created the same way for both the GUI and the ATEM panel. Simply click on the
button marked Borders. This will allow access to all the border parameters as previously
discussed in this manual under "Adding DVE borders".
Please note that if you are using the Art in Foreground mode then the borders are not available
as they would not be visible and that any or all border settings are applied to all boxes. Also
note that ATEM Constellation 8K presents SuperSource without borders in 8K.
Copying Settings
To perform the Copy function using the GUI, simply click on the Copy button and the Copy Box
Settings dialogue will appear. You can quickly & easily copy the settings of the currently
selected box to any of the other boxes, making an exact clone in just one click! The copied
boxes will appear directly behind the master box and will also share the same source as
the master.
If you are using an ATEM panel, select any box via the SuperSource main menu and then the
button marked Copy To. In the window, the currently marked box will then be copied to any of
the other boxes as selected. As with the GUI, the copied boxes will appear directly behind the
master box and will also share the same source as the master.
Putting SuperSource On Air
The entire SuperSource processor appears on your ATEM Switcher as a video input. Simply
select the SuperSource button on the GUI or the ATEM panel to use the composite you have
just made!
Copying the settings of Box 1 to Box 2
Using Auxiliary Outputs 158