Technical Data; Device; Supply; Communication - WAGO 750 Series Manual

30 Device Description
3.9

Technical Data

3.9.1

Device

Table 10: Technical Data – Device
Width
Height (from upper edge of DIN 35 rail)
Length
Weight
3.9.2

Supply

Table 11: Technical Data – Supply
Power supply
Current consumption (internal)
I/O Module power supply at +U and −U 18 V via 753-620 or 787-1007
Maximum supply current (according to
DALI specification)
Guaranteed supply current
(acc. to DALI specification)
Current consumption from DALI bus
with alternative supply via DALI bus
Isolation
Maximum bus voltage startup time
(according to DALI specification)
*) No other power supply must be active on the DALI bus when indirectly powering the DALI network
subscribers via the 753-647 DALI Multi-Master. Otherwise, it is not possible to address the DALI
network subscribers.
3.9.3

Communication

Table 12: Technical Data – Communication
DALI specification
Max. number of addressable
subscribers (DALI addresses)
Transmission channel
Internal bit width
Commissioning and parameterization
Configuration
Manual
Version 1.4.3
12 mm
64 mm
100 mm
55 g
Via system voltage (+5 VDC)
85 mA
power supplies
250 mA
200 mA
10 mA
2100 VDC DALI bus/local bus
400 ms
DIN EN IEC 62386
up to HW 02 64 control gears
from HW 03 63 control gears + WAGO DALI-Multi
Master
1
24-byte data
Via WAGO-I/O-CHECK, e!COCKPIT
and/or via WAGO-I/O-PRO
With WAGO DALI Configurator
WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
*)