28
Device Description
3.6
Display Elements
Figure 5: Display Elements
Table 9: Legend for Figure "Display Elements"
LED
Name/Function
A
B
DALI line (transmit)
C
Operational readiness (local bus communication)
D
E
Full mode
F
DALI line (receive)
Power supply
G
H
Short circuit detection and signaling is only possible if the DALI line is also
*)
powered via the DALI Multi-Master Module, which is powered by a WAGO power
supply.
Diagnosis of the LED Statuses
You can find a detailed overview of the LED statuses and their meanings in the
"Diagnostics" section.
3.7
Operating Elements
The 753-647 I/O module does not have any electro-mechanical operating
elements.
Changes to the configuration and parameters are made via the higher-order
control, or using the special WAGO DALI Configurator.
Manual
Version 1.4.3
Easy mode
•
•
Firmware-update
1 or 2-button operation (only in "easy mode")
•
•
Interruption of the power supply of the I/O module (18 V)
Internal
•
•
External
Error
•
Latching relay function (only in "easy mode")
•
Short circuit on the DALI line
•
WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
*)