Power Jumper Contacts/Field Supply; Cage Clamp ® Connectors; Figure 4: Cage Clamp ® Connectors; Table 8: Legend For Figure "Cage Clamp ® Connectors - WAGO 750 Series Manual

26 Device Description
3.5.2

Power Jumper Contacts/Field Supply

The I/O module 753-647 has no power jumper contacts.
Use a power supply module!
Use a power supply module for field-side power supply of downstream I/O
modules.
3.5.3 CAGE CLAMP
Figure 4: CAGE CLAMP
Table 8: Legend for Figure "CAGE CLAMP
Designation Connector Function
+DA
−DA
+U
−U
Configuration diagram for connections!
The power supply configuration for the I/O module and the configuration for the
DALI network are shown in the figures given in the sub-sections "Power Supply
Configuration for 753-620" and "Power Supply Configuration for 787-1007". You
can also refer to the main section "Installation Notes" > ... > "Module Supply."
Manual
Version 1.4.3
® Connectors
® Connectors
® Connectors"
1 DALI Bus connection +
5 DALI Bus connection +
2 DALI Bus connection −
6 DALI Bus connection −
3 Supply +
7 Supply +
4 Supply −
8 Supply −
WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master