WAGO 750 Series Manual page 71

WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
assigned a dedicated DALI short address, enabling the function to be
addressed individually.
E
Easy Mode
In "Easy" mode, attached DALI devices are represented in binary form with
two bits each on the process image. These two bits correspond to the
button functions (ON/OFF, DIMMING) and are implemented in the DALI
Multi-Master Module (753-647). The status is queried in cycles.
"Easy" mode is implemented via modules in the firmware.
 See also "Full Mode."
ECG (Electronic Control Gear)
 See "Control Gear."
F
Full Mode
In "Full" mode, switching commands are specified by a higher-order control
system via a PLC application.
Transmission within the I/O module takes place via the module-internal
mailbox. Querying of process data is acyclic.
"Full" mode is implemented by modules in WAGO-I/O-PRO.
 See also "Easy Mode."
I
IEC 62386
"IEC 62386" ("Digitally addressable interface for lighting"; German version
DIN EN 62386: "Digital adressierbare Schnittstelle für die Beleuchtung") is
a series of standards that defines details specific to DALI. The series of
standards is being revised by the IEC SC 34C subcommittee and contains
the following parts (version of 2018):
•
•
•
•
- 201: Device type 0: Fluorescent lamps
- 202: Device type 1: Emergency lighting with individual battery
- 203: Device type 2: Discharge lamps
- 204: Device type 3: Low-voltage halogen lamps,
- 205: Device type 4: Incandescent lamp dimmers
- 206: Device type 5: Conversion of the digital input signal to DC
- 207: Device type 6: LED modules
- 208: Device type 7: Switching function
- 209: Device type 8: Color control
- 210: Device type 9: Sequencers
101: System
102: Control gears
103: Control devices
201 to 224: Device types 0–23:
Appendix 71
Manual
Version 1.4.3