Other Maintenance - Epson SC-R5000 Series User Manual

SC-R5000 Series/SC-R5000L Series User's Guide
When to perform
When a replacement message is
displayed on the control panel screen
When an error appears on the control
panel screen indicating ink is expended

Other maintenance

When to perform
When the LED light on the ink unit
flashes blue (once a week)
❏
When checking if nozzles are clogged
❏
When checking which colors are
clogged
❏
Horizontal stripes or tint unevenness
(banding) are appeared.
When a clog is found after checking for
clogged nozzles
When a message is displayed instructing
you to clean the anti-drying caps
When the printer will not be used for an
extended period (and switched off)
When dirt from rollers adheres to print
outs
When it is hard to see inside the printer
Maintenance
Component to be replaced
B
Waste ink bottle
"Disposing of Waste Ink" on page 89
U
D
Wiper Unit
"Replacing the Wiper Unit" on page 91
U
C
Ink Supply Unit
"Shaking and Replacing Ink Supply Units" on page 87
U
Operation
Shaking the Ink Supply Unit
"Shaking" on page 87
U
Print Head Nozzle Check
"Print Head Nozzle Check" on page 95
U
Print Head Cleaning
"Print Head Cleaning" on page 96
U
Cleaning the anti-drying caps
"Cleaning the anti-drying caps" on page 80
U
Keeping Preparation
"Long-term Storage (Pre-storage Maintenance)" on page 97
U
Cleaning pressure rollers
"Cleaning pressure rollers" on page 99
U
Cleaning the inside surface of the printer cover
"Cleaning the inside surface of the printer cover" on page 98
U
75