Download Print this page

Making The Recycle Connection - Waters ACQUITY Refractive Index Detector Overview And Maintenance Manual

Table of Contents

2 Preparing the detector

Location of waste tubing on recycle valve:

Making the recycle connection

To make the recycle connection:

Place the free end of the recycle tubing in the solvent container.

If the recycle tubing was previously placed in the waste container,

Note:

remove it from the waste container, and then place it in the solvent

container.

October 13, 2014, 715003547 Rev. C

Location of waste tubing

Table of Contents

Do you have a question about the ACQUITY Refractive Index Detector and is the answer not in the manual?