Table of Contents
Advertisement
MM4006
Cv%
N e v v p o r t .
2
L
o
IEEE-488 SRQ Used
The SRQ line is an IEEE-488 handshake that ensures proper transmission of
large files (trace data, large programs, etc.) Default is NO.
To enable or disable the use of the SRQ from the General Setup menu,
press U P u n t i l the IEEE SRQ Used appears on the display. Press
MODIFY and then the CHANGE key to select a new setting. Press the VALID
key to accept the entry and return to the previous menu.
Motor OFF
CHANGE
CMQxx — Set IEEE communication SRQ mode.
Communication
This setting selects the communication port to be used with a host comput-
er. The MM4006 controller can use one of RS-232-C, RS-485 or IEEE-488 inter-
faces, but only one at a time. The selection can be made only through this
setup. Default mode is RS-232-C.
To change the existing selection from the General Setup menu, press a l p
until the Communication parameter appears on the display. Press MODIFY
and then the CHANGE k e y to select a new communication port. Press the
V ALID k e y to accept the entry and return to the previous menu.
Motor OFF
CHANGE
CMMxx — Set communication mode.
.
1
5
c
a
SETUP G E N .
VALID ' QUIT Q U I T
..* SETUP G E N .
V ALID * O U P
'
QUIT
E
D
H
0
l
U P
M O D I F Y
•
'UP - - * MODIFY —'
1
8
1
E
n
1
0
2
Mode
0
— 03/03
Advertisement
Chapters
Table of Contents
