F I R S T Move2 - Newport MM4006 User Manual

MM4006
Newport.
L o
If a key in column 0 is pressed, the selected axes will move slowly in the
negative direction.
If a key in column i s pressed, the selected axes will move slowly in the
positive direction.
Column i s used for high-speed jogging. If a key in column i s pressed
simultaneously with one in column 0 or 0, the axis will jog at high speed in
the selected direction.
Now, lets take a look at the keypad row convention (Fig. 2.3).
Fig. 2.3 — The rows of the numeric keypad indicate the axis that will JOG.
Each key row controls one axis, as indicated by the label on the left.
To summarize, if you want to jog fast axis number 2 or 6 in the positive
direction, press simultaneously the keys numbered M E and M I .
The DISPL.-, key switches the display and front panel controls for the
next or previous 4-axis.
To exit the manual jog mode press the
2.1.4 F i r s t Move
From the top level MOTOR M E I menu press the •MOVE f u n c t i o n key. The
display will offer you the following menu:
You can start by pressing the `ABSOL., key to command an absolute motion.
The next screen will look similar on the top four lines, with the exception of
the 10- symbol in front of the first active axis position. As you recall, this
means that a numerical input is required for the marked value.
Use the keypad to enter a desired destination (absolute position). To cor-
c a
o
4 4
1 2
— —
z 1 1
— —
7 8
MIN E l l
0
MIII
Fig. 2.2 — The columns of the numeric keypad
indicate the direction and speed of a JOG.
A X E S
1/5
2/6
3/7
4/8
NOTE
MANUAL 11 E 4 1 . A B S O L . N E X T
2.5
l
6
9 . 1 .
k e y .
ED1-10181En 1020 — 03/03
Mode