Table of Contents
Advertisement
Load Cell Installation - Optional
Do not work on or under this machine unless
securely blocked and supported by a hoist or
tractor or by other sufficient means.
Do not attempt to lift heavy parts manually. Use a
hoist or a fork lift to move these parts into
position.
1. Secure Seeder and Seedbox.
2. Remove eight 3/4-10 x 2 Bolts and Lock Washers
from the top and bottom of Seedbox Mounts. See
Figure 2-18.
3. Raise the Seedbox, remove the Spacer Blocks.
4. Insert Load Cells with the Load Cell Cable oriented
toward the middle. See Figure 2-19.
5. Secure each Load Cell to the bottom Seedbox
Mounts with two 3/4-10 x 2 Bolts and Lock Washers
F-1021-0719
CAUTION
WARNING
Figure 2-19: Load Cell Schematic - Optional
6. Carefully lower the Seedbox ensuring the cutout on
the Seedbox goes over the Load Cell Cable.
7. Secure Seedbox to each Load Cell with two 3/4-10 x
2 Bolts and Lock Washers.
Figure 2-18: Load Cell Installation - Optional
ASSEMBLY
2-21
Advertisement
Table of Contents
