Table of Contents
Advertisement
Wheel Arm Installation
1. Position Wheel Arm Assembly into the Wheel Arm
Bracket. See Figure 2-2.
2. Position a 3/4 Thrust Washer on each side of the
Wheel Arm Assembly and insert Step Pin.
3. Attach Step Pin to Wheel Arm Bracket with 1/2-13 x 2
Bolt and Locknut. Secure Step Pin with 1-1/4 x 2-1/2
x 1/2 Washer, Slotted Nut and 1/4 x 2-1/2 Cotter Pin.
F-1021-0719
4. Install 3 x 8 Hydraulic Cylinder to the Wheel Arm
5. Mount the Tire and Wheel Assembly to the Wheel
Figure 2-2: Wheel Arm Installation
Bracket, by sliding a 1 x 2 11ga SS Washer over 1 x
8-3/4 Pin and insert into Wheel Arm Bracket and
Hydraulic Cylinder Base End. Slide a SS Washer
over end of Pin and secure with Cotter Pin.
Arm Assembly, secure with 9/16-18 Wheel Nuts.
(See "Tires" on page 4-3.)
ASSEMBLY
2-3
Advertisement
Table of Contents
