Table of Contents
Advertisement
ASSEMBLY
3Pt Hitch Installation
1. Attach the 3Pt Hitch to the Seeder Frame with 3/4-10
U-Bolts, Flat Washers and Locknuts. Tighten. See
Figure 2-3.
2-4
2. Attach the Air Manifold Bracket Assembly to the 3Pt
Hitch using two 3/8 x 16 x 5-1/4 Bolts, and Flanged
Locknuts. Do Not tighten until harnesses are
installed.
3. Attach the Toolbox to the 3Pt Hitch using two 3/8-16
x 1 Bolts, Flat Washers and Flanged Locknuts.
4. Insert Top Link and lower 3Pt Pins. Secure with 7/16
Lynch Pins.
Figure 2-3: 3 Pt Hitch (1 of 2)
F-1021-0719
Advertisement
Table of Contents
