Optional Equipment; Electronic Acre Meter Kit 5K745 - Landoll SSB-8 Operator's Manual

ASSEMBLY INSTRUCTIONS

Optional Equipment

Electronic Acre Meter Kit 5K745

Installation:
The acre meter, consisting of three main parts: the acre
meter, the pick-up and the magnet wheel, is mounted on
the left side of the front seedbox.
1. Use the acre meter bracket as a guide and drill two
13/32" holes into seedbox at location shown in
4. Press the magnetic wheel onto the clutch shaft until it
is vertically centered with the pickup switch.
5. Adjust the pickup switch and bracket so the
centerline of magnet wheel and pick up switch are
horizontally and vertically aligned with maximum 1/8"
between magnet wheel and pick up switch. Firmly
tighten all screws. See Figure 2-13.
2-12
2. Attach the pick up switch bracket to the front of the
3. Attach the pick up switch to the top of the 5K714
Figure 2-12: Electronic Acre Meter
illustration. Then attach the acre meter bracket as
shown with two 3/8-16 x 1 Bolts, Lock Washers and
Nuts. See Figure 2-12.
transmission as shown.
bracket with two #8-32 x 1-1/4 Machine Screws, Flat
Washers, Lock Washers and Nuts. Do not tighten
screws at this time. See Figure 2-12.
1P480rev0718