Table of Contents
Advertisement
5. Attach the Manual Holder to the 3Pt Hitch using two
1/4-20 x 1 Bolts, Flat Washers and Locknuts.
6. Attach the Connector Holder to the Air Manifold
Bracket Assembly using two 1/4-20 x 3/4 Bolts, Flat
Washers and Locknuts.
F-1021-0719
7. Place the Calibration Crank and Wrenches in the
Toolbox. See Figure 2-4.
Figure 2-4: 3 Pt Hitch (2 of 2)
ASSEMBLY
2-5
Advertisement
Table of Contents
