Led Warning Lights Installation - Landoll SSB-8 Operator's Manual

ASSEMBLY INSTRUCTIONS

LED Warning Lights Installation

Amber LED Lamp
When plugging in the LED 7-pin connector:
1) Make sure the tractor has a good clean receptacle, free of dirt and corrosion.
2) Make sure the 7-pin connector is inserted ALL the way in. With tighter fitting pins, operator
may think the connector is all the way in, but really isn't.
3) Make sure the tractor receptacle cover latches over the keyway on the 7-pin connector to hold
the connector in place.
If an operator plugs in the 7-pin connector, but the lights do not seem to work right, check the above
items to make sure there is a good connection with the 7-pin connector.
2-6
Red LED Lamp
LED Warning
Lights Harness
7Pin/4Pin
WP Harness
Figure 2-7: LED Warning Lights
Amber LED Lamp
Flasher Control
Module
1P480rev0718