Table of Contents
Advertisement
ASSEMBLY OF OPTIONAL EQUIPMENT
Acre Meter Kit 6K036 Installation
The Acre Meter Kit consists of four main parts; Acre
Meter Assembly, Pick-up Switch Bracket, Pick-up Switch,
and Magnet Wheel.
1. Drill 13/32" holes into seedbox at location shown.
See Figure 3-4.
2. Next, use 3/8-16 NC x 1" capscrews, lockwashers,
and nuts to attach the bracket which holds the acre
meter, as shown, onto the left front of the seedbox.
3-4
Figure 3-4: Acre Meter Installation (1 of 2)
3. Mount the acre meter onto this bracket with #10-24 x
1" machine screws, lockwashers and nuts.
4. Run the wire from the bottom of the meter down the
side of the seed box and along its left side. Use
mounting bases to hold the wire in place. Run it
across the plate which attaches the seedbox to
endplate. Here, it will plug into the mating cable from
the pick-up.
Do not pressure clean with air or water.
WARNING
7K458
Hide quick links:
Advertisement
Table of Contents
