Table of Contents
Advertisement
Braking while manoeuvring func-
tion*
3 Only valid with Parking System Plus
The emergency braking function is used to
minimise damage in the event of a collision.
Depending on the equipment, if the Parking
Aid is active, the braking while manoeuvring
function activates emergency braking when it
detects an obstacle in the vehicle's path that
could cause a collision, driving forwards or in
reverse.
The function will not brake if the Parking Aid is
activated automatically. For the system to
operate, manoeuvring speed must be be-
tween 2.5 and 10 km/h (between 1.5 and 6
mph) for the front area and between 1.5 and
10 km/h (between 1 and 6 mph) for the rear.
Following an intervention, the braking while
manoeuvring function will be inactive in the
same direction of travel for 5 metres. Once
the gear is changed, or the selector lever's
position is changed, the function will be ac-
tive again. The Parking Aid's limitations apply.
The braking while manoeuvring function is
controlled in the Easy Connect system with
the
button and the SETTINGS > Park
function buttons.
and manoeuvre
– permits the use of the braking while
●
on
manoeuvring function.
320
Driving
– does not permit the use of the
●
off
braking while manoeuvring function.
Temporary suppression of emergency
braking
When the function is deactivated with the
●
button that appears
Braking while manoeuvring
on the Parking System screen of the Easy
Connect system.
Whenever any of the car doors, rear lid or
●
bonnet are opened.
Rear parking aid*
Description
The rear parking aid is an audible and visual
assistant that warns of obstacles located be-
hind the vehicle.
There are sensors integrated in the rear
bumper. When they detect an obstacle, you
are alerted by audible warnings and visually
on the Easy Connect system.
If the Top View Camera* is installed, the rear
parking aid will issue an audible warning
about objects near the rear of the vehicle,
and the Top View Camera* image will be
available on the Easy Connect screen, giving
a real image of the objects around the car.
Make particularly sure that the sensors are
not covered by adhesives, residues, dirt and
the like, as this could affect the system's op-
›››
eration. Cleaning instructions
The approximate measurement range of the
rear sensors is:
Side area:
0.60 m
Central area:
1.60 m
Automatic disconnection of Parking Aid
Move the selector lever to position P.
●
OR: accelerate to approx. 15 km/h (9 mph)
●
or faster.
Temporary suppression of sound in Park-
ing Aid
Press the
function button.
●
Change from reduced view to full view
Engage reverse gear or turn the selector
●
lever to position R.
OR: press the car icon in reduced view.
●
As you approach the obstacle, the time inter-
val between the audible warnings will be re-
duced. When you reach around 0.30 m the
warning will be constant: Do not continue to
›››
move forward (or backward)
›››
duction on page
314,
in Introduction
on page
315!
page
372.
in Intro-
Advertisement
Chapters
Table of Contents
