Table of Contents
Advertisement
134
Seats and stowage
Adjusting the contour of lumbar support
– Press the front part of the adjuster switch
to increase the contour of the lumbar support.
– Press the rear part of the adjuster switch to decrease the contour
of the lumbar support.
Adjusting the height of lumbar support
– Press the top part of the adjuster switch to move the lumbar
support upwards.
– Press the bottom part of the adjuster switch to move the lumbar
support down.
The lumbar support provides effective support for the natural curvature of the
spine to give a more relaxed seating position, especially on long journeys.
Memory for driver's seat*
⇒ page 133, fig. 108
Description
The recall buttons in the driver's door can be used to store
and recall up to four different positions for the driver's seat
and exterior mirrors.
Memory buttons
Using the recall buttons 1, 2, 3 and 4
seat and exterior mirror positions for up to four different drivers.
STOP
The seat memory will be disabled if the
(press and release). The word
visible when the lights are switched on).
The stored settings will all remain in the memory. However, the seat and the
exterior mirrors can now only be adjusted using the conventional electrical
⇒ fig.
button
STOP
will light up next to the
Fig. 109 Driver's door:
Memory system
109, you can store and recall the
button is in the up position
button (only
STOP
Advertisement
Table of Contents
