Table of Contents
Advertisement
138
Seats and storage compartments
Adjusting the contour
– Press the front part of the adjuster switch
to increase the contour of the lumbar support.
– Press the rear part of the adjuster switch to decrease the contour
of the lumbar support.
Adjusting the height
– Press the top part of the adjuster switch to move the contour
upwards.
– Press the bottom part of the adjuster switch to move the contour
down.
The lumbar support provides effective support for the natural curvature of the
spine to give a more relaxed seating position, especially on long journeys.
Driver seat memory*
⇒ page 137, fig. 110
Description
The memory buttons in the driver door can be used to store
and recall up to four different positions for the driver seat and
exterior mirrors.
Memory buttons
Using memory buttons 1, 2, 3 and 4
seat and exterior mirror positions for up to four different drivers.
STOP
The seat memory will be disabled if the
(press and release). The word
visible when the lights are switched on).
The stored settings will all remain in the memory. However, the seat and the
exterior mirrors can now only be adjusted using the conventional electrical
⇒ fig.
button
STOP
will light up next to the
Fig. 111 Driver door:
Memory system
111, you can store and recall the
button is in the up position
STOP
button (only
Advertisement
Table of Contents
