Auto-Check System - Seat Toledo 2015 Owner's Manual

Table of Contents

Advertisement

Settings
You can make certain adjustments using the
informative display. The current values are
displayed directly in their respective places
above and below the line.
The following items can be selected:
Language
MFD data
Time
Winter tyres
Units
Second speed
Inspec. Service
Factory settings
Back
Select the option Back to return to the superi-
or menu level.
Language
Here the language used to display the warn-
ing and information texts can be selected.
MFD data
Here certain data shown on the multifunction
display can be switched on or off.
44
Operation
Time
In this menu you can set, the time, the dis-
play format (24 or 12 hours) and changes
from winter to summer time.
Winter tyres
The speed at which an audible warning is
given can be adjusted here. This function can
be used with winter tyres, whose maximum
permitted speed is lower than the maximum
speed of the vehicle.
When exceeding the maximum speed the fol-
lowing is shown on the display:
Winter tyres max speed ... km/h ... (mph)
Units
The units of measure for temperature, con-
sumption and journey distances can be set
here.
Second speed
The second speed can be activated/deactiva-
ted in mph or km/h respectively here.
Inspection Service
Here you can choose to display the kilome-
tres (miles) and days remaining until the next
service, and reset the service interval display.
Factory settings
Select Factory setting to reset the values of
the informative display to their factory set-
tings.
Door, rear lid or bonnet open indicator
If at least one of the doors, rear lid or bonnet
is open, a symbol is shown on the informa-
tive display indicating that the door, rear lid
or bonnet concerned is open.
An audible warning is also given simultane-
ously if the vehicle is being driven at a speed
higher than 6 km/h (4 mph).

Auto-check system

Vehicle status
When the ignition is switched on, some vehi-
cle functions such as the condition of its sys-
tems are continually checked.
The warning messages about eventual faults
in addition to other information is displayed
on the informative display. This information
is displayed together with the respective
symbols on the informative display or by
warning lamps that illuminate on the general
›››
instrument panel
page
32.
The option, Vehicle status , appears in the
menu when at least one warning message is

Advertisement

Table of Contents
loading

Table of Contents