Avaya IX Collaboration Unit CU360 Release Notes page 83

© 2019 Avaya Inc. All rights reserved
Category
Snapshots & Web
Video
Screen Link
SNMP
Presence
MSSv1
Cloud connection
Release Notes for Avaya IX Collaboration Unit CU360
Case Number/
Description of issue
Ticket ID
Your recording can become
corrupted if USB key is
unplugged while a USB
recording is in progress.
"Repair this drive" alert on
Windows PC about the USB key,
SR 1-14667770962 when it is unplugged from a
CU360, and then plugged to a
PC.
Save Recording status seems
correct, but the file is not
available in AESR.
To record your CU-360 screen to
a local USB storage device,
insert it in one USB slot. Use a
USB storage device formatted
with FAT32, EXT2, EXT3, EXT4.
Other formats, even if
supported, are not
recommended and could cause
issues.
Web video is not supported in
this release
When screen link is used, audio
RVXT5000-1293
is not transmitted from PC/Mac
SNMP is not supported
Manual Presence Status is
forced to "Busy" when in a SIP
RVXT5000-1244
call when using IP Office as
Presence and SIP Server.
Offline presence status in not
correctly displayed by the Avaya
endpoint when using Aura
Presence Server 7.1 (pre-
release)
It is not possible to subscribe to
accounts used by One-X Portal
clients.
Contacts are not notified of
subscription requests. It is not
possible to grant/revoke
Avaya One-X
subscription request.
Portal for IP Office.
Endpoints must manually
subscribe to other contacts to
view their presence
MSS is not supported in this
release
Codec Unit Auto-Provisioning
Service may be interrupted,
including for maintenance,
repairs, upgrades, or equipment
or network failures. We may
discontinue certain features and
the support for certain Codec
Unit devices at any time. Events
beyond our control may affect
our service, such as force
majeure events.
When Codec Unit outside
company premises is managed
by Equinox Management, it
Cloud Service
cannot join an existing meeting
Availability
which requires Path Finder
access (H323 call).
Solution/Workaround
Stop the recording before unplugging the USB key.
This notice is a false alarm, if the repair procedure is
executed there are no issues found on the USB
storage.
In any case, to avoid the alert, please go to CU360
OS Settings> Settings >Storage > and press the
"Eject" symbol ( ) before pulling out the USB
storage.
Verify that your Owner name and the Organization
ID are correct. Transfer status shown by the Codec
Unit is relative to FTP transfer.
Select "Aura 7.1" as presence server type.
As a workaround you can temporarily assign the
same account to another Codec Unit, subscribe to it
from your Codec Unit, and then move it again to the
client.
Temporarily disable Equinox Management or place
a SIP call to join the meeting.
To temporarily disable Equinox Management,
change Configure> Advanced>Remote
Access>Equinox Management>Mode to Local; and
Automatic IP address to No; write down the original
Known Issues 21