Avaya IX Collaboration Unit CU360 Release Notes page 74

© 2019 Avaya Inc. All rights reserved
Upgrade via USB key – Automatic Mode
Upgrade via Web – Automatic Mode
Release Notes for Avaya IX Collaboration Unit CU360
•
Accept the usage agreement
•
Insert IP address of the codec unit to upgrade in the Codec Unit IP address field.
•
Press "Start" button in the app.
Software Upgrade Application
•
Do not turnoff or unplug the codec unit, until it completes the upgrade.
•
The application will signal that the software package transfer is completed. Wait until
the codec unit applies the updates contained in the package and the CU360 Video-
collaboration application restarts, by checking the progress on the CU360 App
graphical interface (monitor screen).
•
This procedure is completed when you see the initial graphical menu of the CU360
App displayed continuously for at least one minute after the app is restarted.
•
If the app does not restart but it shows an indication to repeat the upgrade, press the
"Start" button again.
End Upgrade Message
•
Save the CU-360_Vx_y_z.exe file containing the software package in an USB key or
storage
•
Plug the key in the back of the codec unit, when it is not in a call.
•
To upgrade from an USB key, the version file must be named CU-360_Vx_y_z.exe.
Do not change version file name, otherwise the package will not be recognized.
•
Do not turnoff or unplug the codec unit, until it completes the upgrade.
•
The application will signal that the software package transfer is completed. Wait until
the codec unit applies the updates contained in the package and the CU360 App
restarts, by checking the progress on the CU360 App graphical interface (monitor
screen). Please note that the code unit will not reboot.
•
This procedure is completed when you see the initial graphical menu of the CU360
App displayed continuously for at least one minute after the app is restarted.
•
Save the CU-360_Vx_y_z.exe file containing the software package in your computer
or mobile storage
•
Open a Browser on your computer or mobile device
•
To login into the Codec Unit with a web browser, browse to
https://<Codec_IP_Address>
•
The default credentials are User: Admin, Password: 1234
•
Using the Web Client, go to Administrator Settings > Utilities > Software Update and
press Next
Software Upgrade 21