Avaya IX Collaboration Unit CU360 Release Notes page 36

© 2019 Avaya Inc. All rights reserved.
Pre-Provisioning an Avaya IX Endpoint
To define a pre-provisioning parameter for an endpoint, click on the Add button in the Avaya
Equinox® Management Endpoints tab, and choose Pre-Provisioning an Endpoint.
You can provision Avaya XT Series and Avaya CU360 endpoints in the exactly same way.
Add a Pre-Provisioned Endpoint
A Service Code corresponding to the pre-provisioned endpoint profile is generated.
You can then specify a set of basic/advanced settings for an endpoint.
Pre-provisioned Endpoint's Service Code
© 2015 Avaya Inc. All rights reserved. NDA Confidential, Use pursuant to your agreement.
Important
•
This feature will be supported for an endpoint installed in any location, provided
that an Avaya Equinox® Management compatible version is available for
association with the endpoint, that the Auto-provisioning Endpoint feature is
enabled on Avaya Equinox® Management, that the endpoint is connected to
the Internet and that your DHCP server is able to assign a valid DNS address to
the endpoint.
•
Please refer to Avaya Equinox® Management documentation for further details
about configuring this feature.
Important
•
The endpoint Auto-Provisioning Service may be interrupted, including for
maintenance, repairs, upgrades, or equipment or network failures. We may
discontinue certain features and the support for certain video devices at any
time. Events beyond our control may affect our service, such as force majeure
events.