Avaya IX Collaboration Unit CU360 Release Notes page 35

© 2019 Avaya Inc. All rights reserved.
Easy to Start Sequence – Configuration Completed
Cloud Management and Auto-Provisioning
The input of a numeric code at the first startup allows configuring your endpoint
automatically with a pre-provisioned profile created by your IT Administrator using Avaya
Equinox® Management available as part of Equinox Solution 9.0.0 or higher.
When using an Avaya IX video endpoint in a company where Avaya Equinox® Management
is available, the administrator can now enable the Auto-Provisioning feature in the Avaya
Equinox® Management Settings.
Auto-Provisioning an endpoint means to define a set of parameters for it in Avaya Equinox®
Management, even before it is connected to the network (at home or in the company
premises), and have the endpoint get these parameters automatically from Avaya Equinox®
Management at first startup. Once provisioned, the endpoint will be managed by the Avaya
Equinox® Management, which can change the endpoint configurations and preferences at
any time.
Avaya Equinox® Management with Auto-Provisioning Server Code
In this way the administrator can easily configure a provisioning profile for any Avaya IX
endpoint even before it is installed. No manual configuration is required on the endpoint for
common parameters.
© 2015 Avaya Inc. All rights reserved. NDA Confidential, Use pursuant to your agreement.
Important
•
Only SIP parameters are configured by this procedure in this release.
•
If you want to see your Exchange Calendar on the endpoint, you need to
configure it separately in this release. See Integration with Microsoft Exchange
Calendar.