Assigning Profinet Device Names - Siemens Sinamics S120 Comissioning Manual

Commissioning
4.4 Establishing an online connection to the drive
4.4.3.4

Assigning PROFINET device names

Assigning a name
In addition to the IP address, the drive must also be assigned a device name for operation in
a PROFINET subnet.
The name must comply with the DNS name syntax; for detailed information, review the TIA
Portal online help.
● The drive does not have a device name in the delivered state.
● If the drive already has a name, perform "Restore factory settings". The name is deleted.
Requirement
An online connection has been established to the device.
"Online access" procedure
To assign a name, proceed as follows:
1. Double-click "Online & Diagnostics" under "Online access" in the project navigator.
2. Double-click the "Functions" entry in the secondary navigation of the working area.
3. Double-click the "Assign PROFINET device name" entry in the secondary navigation.
Figure 4-36
4. Enter a device name in the "PROFINET device name" field.
5. Click "Assign name" to assign a name to the drive.
6. Update the interface at "Online access". The name is now displayed.
Result
The name has been assigned to the drive.
98
Assigning names
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Commissioning with Startdrive