Siemens Sinamics S120 Comissioning Manual page 111

Releasing users
You can release "SINAMICS" and "Administrator" users with their specific rights. You can
also specify as to whether password protection should be active for the "SINAMICS" user.
Default settings:
● SINAMICS: Password protection
We recommend that you change the password. This must comprise at least 8 characters.
● Administrator: Password protection (password is preset).
A password with at least 8 characters must be assigned. If a password has not been
assigned, the following warning appears when attempting to login "A09000: Web server
security: Administrator password not set".
The "Administrator" user has the full rights as standard. However, only restricted access
rights apply for the standard "SINAMICS" user.
Note
Secure passwords
SINAMICS specifies almost no password rules for the assignment of passwords. The only
rule is that at least 8 characters are used. You can therefore assign any passwords without
restriction. Startdrive does not make any checks for illegal characters or passwords which
have already been used. Therefore, as the user, you are responsible for the required
password security.
Use a sufficiently long password (10 characters). Use special characters and avoid
passwords which you have already used elsewhere.
Please note that if the Windows language settings are changed, errors can occur when
subsequently checking the password. If you use language-specific special characters, you
must ensure that the same language setting is active on the computer for subsequent entry
of the password.
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
4.6 Basic parameterization of the drive objects
Commissioning
111