Siemens Sinamics S120 Comissioning Manual page 93

Going online
If you have found the drive at "Online access", establish an online connection. The first time
you establish a connection, you must set the "PG/PC interface" and "Connection to
interface/subnet" parameters:
1. Click the "Go online" button.
The "Go online" dialog box opens.
Figure 4-32
2. If a correctly configured interface has still not been set, then select "Type of the PG/PC
interface" in the drop-down list.
3. Select "PG/PC interface" of your PC in the drop-down list.
4. Select the required "Connection to interface/subnet" from the drop-down list.
For Ethernet/IE, this is X127 of the CU320-2 PN.
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Go online
4.4 Establishing an online connection to the drive
Commissioning
93