User Interface - Parameterization; Modules In The Hardware Catalog - Siemens Sinamics S120 Comissioning Manual
With startdrive
Hide thumbs
Also See for Sinamics S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Startdrive commissioning tool
2.3 User interface - parameterization
2.3
User interface - parameterization
2.3.1
Modules in the hardware catalog
As soon as the device configuration is active, a hardware catalog can be displayed/hidden at
the right-hand edge of the program window. The device configuration automatically becomes
active as soon as a drive device was inserted. The required SINAMICS modules can be
transferred from the hardware catalog into a project and specified.
For instance, you can insert an infeed unit from the hardware catalog (see Chapter "Inserting
a space holder for an infeed unit (Page 64)").
30
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Commissioning with Startdrive
Advertisement
Table of Contents
