Project navigator
Management and creation of the trace and measurements directly in the project tree and via context menu commands.
Working area
①
Trace toolbar
Icons for managing the trace in the project and device:
Activation/deactivation of installed traces
•
Deletion of installed traces
•
Transferring trace configurations and measurements between the device and project
•
Exporting trace configurations and measurements
•
Switchover between offline and online display
•
②
Status display of the trace
Display of the current status of the recording. The status is displayed only in online mode.
③
Configuration tab
Device-specific configuration of the trace duration, trigger condition and signal selection.
④
Diagram tab
Display of the recorded values as a curve diagram and the signal sources from the displayed measurement.
"Trace" tab
Display of the measurement cursor data
Inspector window
Display of general information regarding the trace configuration
Figure 2-9
Trace interface
See also
Trace function calls (Page 199)
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
⑤
and snapshots.
Startdrive commissioning tool
2.4 User interface - trace function
41