4.6.2
Infeed unit
4.6.2.1
Overview
Infeed units (Line Modules)
Line Modules contain the central line infeed for the DC link. Various Line Modules can be
selected to address the various application profiles:
● Basic Line Modules (BLM)
● Smart Line Modules (SLM)
● Active Line Modules (ALM)
Basic parameterization of the infeed unit
You can carry out basic parameterization for the following infeed data:
● Function modules
● Line data/operating mode
● Enable logic
Calling the screen form
1. In the project navigation, select menu "Infeed_x > Parameter".
The corresponding detailed view is displayed at the right.
2. In the secondary navigation, call menu "Basic parameterization > xxx" (xxx stands for the
name of the particular detailed screen form).
The detailed view is updated.
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
4.6 Basic parameterization of the drive objects
Commissioning
113