Table of Contents
Advertisement
Troubleshooting
Tab. 15: Warnings
Log book no.
Description
0
The temperature in the PFC is too high.
1
The FC is overloaded.
2
The temperature in the FC is too high.
3
-
4
The feed chemical reaches "Warning" level.
5
The hose lifetime reaches "Hose-warning" point.
...
...
9
An HMI was connected to a CANopen pump.
16.3.3
Event messages in the log book
Tab. 16: Events
Log book no.
Description
0
-
...
...
7
The pump was reset to factory settings.
8
The pump was calibrated.
9
...
...
12
The pump hose was replaced.
...
...
21
The dosing direction was changed.
16.3.4
Log book entry - detailed view
88
Only with HMIX.
[START/STOP] was pressed.
For more information about a log book entry, press the
Tab. 17: Information on the detailed view
Line
1
2
3
4
5
Information
Date, time
Type of entry (fault, warning ...)
Total operating time, total revolutions
Switching-on duration, revolutions since switching on
Room temperature, additional information on the error
(for developers)
[Clickwheel] .
Advertisement
Table of Contents
