Installation, Electrical - ProMinent DULCO flex Control-DFYa Operating Instructions Manual

Peristaltic metering pump
Table of Contents

Advertisement

9

Installation, electrical

User qualification: Electrical technician - see
on page 14
WARNING!
Danger of electric shock
A mains voltage may exist inside the device.
Before any work, disconnect the device's mains
cable from the mains.
WARNING!
Risk of electric shock
This pump is supplied with a grounding conductor and a
grounding-type attachment plug.
To reduce the risk of electric shock, ensure that it is
connected only to a proper grounding-type recep‐
tacle.
WARNING!
Risk of electric shock
In the event of an electrical accident, the pump must be
quickly disconnected from the mains.
Install an emergency cut-off switch in the pump
power supply line or
Integrate the pump in the emergency cut-off man‐
agement of the system and inform personnel of the
isolating option.
WARNING!
Danger of electric shock
Incompletely installed electrical options can allow mois‐
ture into the inside of the housing.
Fit appropriate modules into the slot on the front of
the pump or use the original blank cover to seal it in
a leak-tight manner.
WARNING!
Danger of electric shock
A mains voltage may exist inside the pump housing.
If the pump housing has been damaged, you must
disconnect it from the mains immediately. It may
only be returned to service after an authorised
repair.
CAUTION!
Risk of short circuiting caused by moist pins
No moisture must reach the pins of the PROFIBUS
jack.
A suitable PROFIBUS
be screwed onto the PROFIBUS
Installation, electrical
Ä 'Qualification of personnel'
®
plug or protective cap must
®
®
jack.
35

Advertisement

Table of Contents
loading

Table of Contents