ProMinent DULCO flex Control-DFYa Operating Instructions Manual page 62

'Menu'
Set up /
Sorting sequence
12.4.2.4 Change program lines (
12.4.2.5 Delete individual program lines (
62
[Clickwheel] .
2. Turn the
ð Scroll from instruction to instruction.
The number of the program line or instruction (and the number
of the last program line or instruction) appears at the top in the
dark bar.
3. Pressing the [Clickwheel] returns you to 'Set timer' .
As the timer software automatically sorts the program
lines, the numbers of the program lines can change if
you change something.
The timer software automatically sorts every newly programmed program
line / instruction after completing it (press the
program lines.
The 1st sorting criterion is the type of time event (trigger) (for the
Ä Further information on page 59 and Ä Further infor‐
sequence refer to
mation on page 60 ).
Time-dependent program lines are ordered below each other initially after
the Switching point (2nd sorting criterion)
then after the length of the Cycle (3rd sorting criterion).
The 4th sorting criterion is the type of action (see also the programming
examples at the end of these instructions).
A purely time-controlled timer program will also run in this sequence.
'Change' )
'Menu / Information è Timer è Set timer è Change'
[Clickwheel] to select the required program line / instruction
1. Use the
according to its number and press the
2. Click through the instruction and change it.
ð The timer software sorts a changed program line / instruction
after completion with the
between the other program lines (Rules - see
sequence' on page 62 ).
'Clear' )
'Menu / Information è Timer è Set timer è Clear'
[Clickwheel] to select the required program line / instruction
1. Use the
according to its number.
2. The program line will be deleted as soon as you press the
[Clickwheel] .
ð The timer software re-sorts the remaining programme lines
(Rules - see
Delete all program lines
The option to delete all program lines is to be found one
level higher in the menu:
'Menu / Information è Timer è Clear all'
[Clickwheel] ) below the other
[Clickwheel] .
[Clickwheel] possibly differently in
Ä 'Sorting sequence' on page 62 ).
Ä 'Sorting