ProMinent DULCO flex Control-DFYa Operating Instructions Manual page 29

Changing the number of spacer plates –
'Hose change' menu
using the
Fig. 9: Rotor of DFYa
6 Spacer plates
9 Roller
To adjust the number of spacer plates:
** The number of spacer plates for Norprene
nothing more.
Note that you will change the identity code of the pump
by changing the number of spacer plates.
Requirements
Ensure that the system is at atmospheric pressure.
n
Adhere to the material safety data sheet for the feed chemical.
n
Prevent the escape of feed chemical.
n
If necessary take protective measures.
n
1. If necessary, press
(Manual)' .
2. Drain the liquid end – flush out with a suitable medium; flush the
liquid end thoroughly when using hazardous feed chemicals!
'Hose change' menu.
3. Go to the
'Go to change position?' appears.
ð
® is always 9 – you need to do
[STOP/START] to bring the pump to a 'Stop
Assembly
P_DX_0070_SW_2
29