Storage, Transport And Unpacking - ProMinent DULCO flex Control-DFYa Operating Instructions Manual

Storage, transport and unpacking

4 Storage, transport and unpacking
Safety information
Ambient conditions
Storage period, max.
Scope of delivery
16
User qualification: Instructed person - see
on page 14
WARNING!
Only return metering pumps for repair in a cleaned state
and with a flushed liquid end - refer to "Decommis‐
sioning!
Only return metering pumps with a completed Decon‐
tamination Declaration form. The Decontamination Dec‐
laration constitutes an integral part of an inspection /
repair order. A unit can only be inspected or repaired
when a Declaration of Decontamination Form is sub‐
mitted that has been completed correctly and in full by
an authorised and qualified person on behalf of the
pump operator.
The "Decontamination Declaration Form" can be found
on our homepage.
CAUTION!
Danger of material damage
The device can be damaged by incorrect or improper
storage or transportation!
– The unit should only be stored or transported in a
well packaged state - preferably in its original pack‐
aging.
– The packaged unit should also only be stored or
transported in accordance with the stipulated
storage conditions.
– The packaged unit should be protected from mois‐
ture and the ingress of chemicals.
CAUTION!
Before shipping
Remove the pump hose from the pump before shipping.
Ambient conditions - see "Technical data" chapter.
Storage period of pump hose non-condensing, max.: 2 years
Compare the delivery note with the scope of delivery:
Metering pump with mains cable
n
Pump hose
n
2nd roller for the rotor
n
Spacer plates
n
Connector kit for hose/pipe connection (option)
n
Product-specific operating instructions with EU Declaration of Con‐
n
formity
Ä 'Qualification of personnel'