Table of Contents
Advertisement
16.2.3
All other faults
16.3
Log book
16.3.1
Fault messages in the log book
Tab. 14: Errors
Log book no.
Description
0
If one of the signals needed from the frequency converter (FC) is missing
and/or if no communication is established between the FC and the control.
1
-
2
Different version status of the communication software between CTRL,
PFC and FC
3
The HMI version is not compatible or communication between the pump
and operating unit is not working, although an operating unit has been con‐
figured.
4
-
5
System, EEPROM error
6
The float switch input reports no feed chemical.
7
The hose is ruptured.
...
...
11
The mA signal is ≤ 3.8 mA when the monitor is switched on.
12
The mA signal is ≥ 23 mA when the monitor is switched on.
13
In
'Batch' or 'Contact' operating mode, a memory overload has occurred
when the memory is switched on.
14
The options module is missing or no communication is established with the
options module.
15
There is no ongoing connection to the options module.
16
-
17
The 5 V at the DFM input has short circuited.
18
A module was inserted into the pump, which cannot be used.
16.3.2
Warning messages in the log book
Please contact the responsible ProMinent branch or representative!
For more information on the 'ERROR' messages - refer
to the chapter "Fault messages on the LCD screen".
For more information on the 'WARNING' messages -
refer to the chapter "Warning messages on the LCD
screen".
Troubleshooting
Acknowledge?
X
X
X
X
X
87
Advertisement
Table of Contents
