Table of Contents
Advertisement
12.4.7
Brief explanation of selected functions
Time event (trigger)
Actions
Initialisation
Outputs
An event can be triggered either time-dependent or event-controlled.
1 - Time events (really time-dependent) are processed precisely to the
minute.
'Init' ) is executed at the start of the program ( 'Timer
2 - Initialisation (
Activation è active' or when mains voltage is connected) to obtain
è
a defined status of the system.
3 - Delayers can trigger an action as soon as their time has expired.
'Actions' which the timer executes as soon as a 'time
These are the
event' has occurred.
'Activation' is set to 'active' , the timer software generates the state
When
of the pump which the pump would have precisely had at this time if it had
'active' without any interruption.
been set to
Using the initial commands (
grammed. Initial commands have priority over time commands.
Those relays which were connected with the relay option are designated
as outputs. Up to 2 relays can be fitted.
Set up /
'Init' ), a defined switch-on state can be pro‐
'Menu'
65
Advertisement
Table of Contents
